YL INDUSTRIAL SUPPLIES & SERVICES SDN. BHD.

AUTOMATION

Stacker

  • Push-Up Stacker

    YL-DLS350

    The Push-up Stacker is used for restacking un-populated boards at the end of the line. Stacking is done by a pneumatic lifter, which gently raises the PCBs from the belt conveyor and adds the PCB one by one to the bottom of the stack.

    Features
    ‣ PUSH-UP Stacker and bypass function
    ‣ Screen touch panel control + Mitsubishi PLC
    ‣ SMEMA compatible
    ‣ Collect the bare PCBs from the upstream machine
    ‣ PCB level stack-height sensor
    ‣ Short PCB cycle time
    ‣ 3-colors light tower and audible alarm
    ‣ PCB counters
    ‣ Conveyor width adjustable by manual handle
    ‣ CE certificates

    Model

    YL-DL350S

    PCB Size

    50mm (L) x 50mm (W) – 500mm (L) x 480mm (W)

    PCB Stack Capacity

    400 pieces (0.8mm thickness) or 240 mm (9.45”) stack height

    PCB Thickness

    0.4mm min. (0.016” min.)

    2.5mm max. (0.098” max.)

    Conveyor Direction

    Left to right (standard) or right to left (optional) operation

    Conveyor Belt

    3mm Edge Be


     

Destacker

  • YL-DL 350 Destacker

    Destacker

    This unit is a top loading, drop style PCB destacker. It is used for loading of bare PCBs to the production line.

    Features
    ‣ Destacker and bypass function
    ‣ Screen touch panel control + Mitsubishi PLC ​                                                                
    ‣ SMEMA compatible
    ‣ Loading of stacked PCBs
    ‣ Pre-warning low stack sensor
    ‣ Short PCB cycle time
    ‣ 3-colors light tower and audible alarm
    ‣ PCB counters
    ‣ Conveyor with adjustable by manual handle
    ‣ CE certificates

    Model

    YL-DL350

    PCB Size

    50mm (L) x 50mm (W) – 500mm (L) x 460mm (W)

    PCB Stack Capacity

    400 pieces (0.6mm thickness) or 240 mm (9.45”) stack height

    PCB Thickness

    0.4mm min. (0.016” min.)

    2.5mm max. (0.098” max.)

    Conveyor Direction

    Left to right (standard) or right to left (optional) operation

    Conveyor Belt

    3mm Edge Belt

Loader

  • Magazines Loader

    PCBs production line

    Magazine Loader is designed at the starting of the line for loading of PCBs to the production line. The unit loads the production line automatically by pushing PCBs out of a magazine onto the conveyor of the down-stream machine.

    Features
    ‣ Touch screen (OP panel) + controlled by PLC
    ‣ SMEMA interface
    ‣ Pitch select-ability
    ‣ 3 Magazine racks capacity (upper x1, lower x2)
    ‣ Magazine rack 50 slots
    ‣ Self diagnostic error code display
    ‣ AirTec pneumatic pusher cylinder, pressure regulated
    ‣ Pusher position adjustable according to PCB thickness
    ‣ Direction from left to right or right to left (optional)
    ‣ CE certificates
    ‣ Space save type (optional)
    ‣ Electric pusher type (optional)
    ‣ Ethernet ability and RS-485 (optional)

  • Single Magazine Loader

    SMT Line

    Magazine Loader is used at the starting of the line for loading of PCBs to the production line. It is “L” type single magazine loader to help save the factory space.

    Features
    ‣ Touch screen (OP panel) + Controlled by PLC
    ‣ SMEMA interface
    ‣ Pitch select-ability
    ‣ Single magazine rack
    ‣ Magazine rack 50 slots
    ‣ Self diagnostic error code display
    ‣ Pusher position adjustable according to PCB thickness
    ‣ Direction from left to right or right to left (optional)
    ‣ CE certificates
    ‣ Space save type (optional)
    ‣ Electric pusher type (optional)
    ‣ Ethernet ability and RS-485 (optional)

    Model

    YL-SLS250M

    YL-SLS330L

    YL-SLS390L

    YL-SLS460L

    PCB size (L*W)mm

    80 x 50 ~ 330 x 250

    80 x 50 ~ 460 x 330

    80 x 50 ~ 510 x 390

    80 x 50 ~ 510 x 460

    Conveyor Height

    900 ± 20 mm

    900 ± 20 mm

    900 ± 20 mm

    900 ± 20 mm

    Dimension (L*W*H) mm

    1150*1030*1250

    1350*1120*1250

    1500*1310*1250

    1500*1450*1250

    Magazine Size (mm)

    355 x 320 x 565

    460 x 400 x 565

    535 x 460 x 570

    535 x 530 x 570

  • Combination Magazine Loader

    SMT Line

    It can be used to load PCBs onto the production line from either magazines or stacks, simplifying double-sided board assembly. Ideal for double-sided assembly. Load bare boards from stacks or partial assemblies from magazines.

    Features
    ‣ Magazine loader and destacker mode combination type
    ‣ Touch screen (OP Panel) + Controlled by PLC
    ‣ SMEMA interface
    ‣ Pitch select-ability
    ‣ Magazine rack 50 slots
    ‣ Self diagnostic error code display
    ‣ Pusher position adjustable according to PCB thickness
    ‣ Direction from left to right or right to left (optional)
    ‣ CE certificates
    ‣ Space save type (optional)
    ‣ Electric pusher type (optional)
    ‣ Ethernet ability and RS-485 (optional)

     

    Model

    YL-VLX250

    YL-VLX330

    PCB Size (mm)

    80 x 50 ~ 330 x 250

    80 x 50 ~ 460 x 330

    Conveyor Height (mm)

    900 ± 20

    900 ± 20

    Dimension (mm)

    1750*750*1600

    2150*930*1600

    Magazine Size (mm)

    355 x 320 x 565

    460 x 400 x 565

Unloader

  • Magazine Unloader

    SMT Line

    The Automatic Unloader is designed for unloading for PCBs, an arriving PCB is taken up by the attached conveyor and then pushed into the magazine by a specially designed pusher.

    Features
    ‣ Touch screen (OP panel) + Controlled by PLC


    ‣ SMEMA interface
    ‣ Pitch select-ability
    ‣ 3 Magazine racks capacity (upper x1, lower x2)
    ‣ Magazine rack 50 slots
    ‣ Self diagnostic error code display
    ‣ Pusher position adjustable according to PCB thickness
    ‣ Electric pusher type
    ‣ Direction from left to right or right to left (optional)
    ‣ CE certificates
    ‣ Ethernet ability and RS-485 (optional)

    Model

    YL-SUL250M

    YL-SUL330L

    YL-SUL390L

    YL-SUL460L

    PCB size (L*W)mm

    80 x 50 ~ 330 x 250

    80 x 50 ~ 460 x 330

    80 x 50 ~ 510 x 390

    80 x 50 ~ 510 x 460

    Conveyor Height

    900 ± 20 mm

    900 ± 20 mm

    900 ± 20 mm

    900 ± 20 mm

    Dimension (L*W*H) mm

    1680*750*1250

    1920*650*1250

    2160*910*1250

    2160*980*1250

    Magazine Size (mm)

    355 x 320 x 565

    460 x 400 x 565

    535 x 460 x 570

    535 x 530 x 570

  • Single Magazine Unloader

    SMT Line

    The Automatic Unloader is designed for unloading of PCBs, an arriving PCB is taken up by the attached conveyor and then pushed into the magazine by a special designed pusher. It is “L” type single magazine unloader to help save the factory space.

    Features
    ‣ Touch screen (OP panel) + Controlled by PLC
    ‣ SMEMA interface
    ‣ Pitch select-ability
    ‣ Single magazine rack
    ‣ Magazine rack 50 slots
    ‣ Self diagnostic error code display
    ‣ Pusher position adjustable according to PCB thickness
    ‣ Direction from left to right or right to left (optional)
    ‣ CE certificates
    ‣ Space save type (optional)
    ‣ Electric pusher type (optional)
    ‣ Ethernet ability and RS-485 (optional)

    Model

    YL-SUL250MS

    YL-SUL330LS

    YL-SUL390LS

    YL-SUL460LS

    PCB size (L*W)mm

    80 x 50 ~ 330 x 250

    80 x 50 ~ 460 x 330

    80 x 50 ~ 510 x 390

    80 x 50 ~ 510 x 460

    Conveyor Height

    900 ± 20 mm

    900 ± 20 mm

    900 ± 20 mm

    900 ± 20 mm

    Dimension (L*W*H) mm

    1980*750*750

    2590*750*750

    2660*750*750

    2760*750*750

    Magazine Size (mm)

    355 x 320 x 565

    460 x 400 x 565

    535 x 460 x 570

    535 x 530 x 570

  • NG/OK Magazine Unloader

    SMT Line

    Used after AOI. The OK and NG PCB after being tested by AOI can be separated and sent to the PCB racks.

    Features
    ‣ Touch screen (OP Panel) + Controlled by PLC
    ‣ SMEMA interface
    ‣ Pitch select ability
    ‣ Magazine rack 50 slots
    ‣ Top & bottom pneumatic clamps to secure magazine rack
    ‣ Automatic shuttle moves the NG board to the NG magazine
    ‣ Self diagnostic error code display
    ‣ Connecting with AOI or ICT and distinguish good PCBs from the NG PCBs
    ‣ Direction from left to right or right to left (optional)
    ‣ CE certificates
    ‣ Space save type (optional)
    ‣ Electric pusher type (optional)
    ‣ Ethernet ability and RS-485 (optional)

    Model

    YL-SLD3BM

    YL-SLD3BL

    YL-SLD3BXL

    PCB Size (mm)

    80 x 50 ~ 330 x 250

    80 x 50 ~ 460 x 330

    80 x 50 ~ 510 x 460

    Conveyor Height (mm)

    900 ± 20

    900 ± 20

    900 ± 20

    Dimension (mm)

    1500*1400*1250

    2100*1600*1250

    2350*1840*1250

    Magazine Size (mm)

    355 x 320 x 565

    460 x 400 x 565

    535 x 530 x 570

Conveyor

  • Dual Lane Transfer Conveyor

    50cm Conveyor Length

    Model: YL-PTB460A

    ‣ Stainless steel lead screw width adjustment
    ‣ Ergonomically designed ESD table
    ‣ Adjustable speed control: 0 – 12m/min
    ‣ International SMEMA standard
    ‣ Modular design, PLC controller + Omron sensor
    ‣ Pass through function
    ‣ Front rail fixed
    ‣ Conveyor length: 500mm
    ‣ Single lane mode: 50(L) x 50(W) – 500(L) x 510(W) mm
    ‣ Dual lane mode: 50(L) x 50(W) – 500(L) x 280(W) mm
    ‣ Conveyor height: 900 ± 20mm
    ‣ E-STOP press button
    ‣ CE compliance
    ‣ 2 years parts warranty
    ‣ Diameter 3mm edge belt
    ‣ Power: AC 220V, 50/60Hz, 1 phase
    ‣ PCB Convey Direction: Left to Right (Or Right to Left)
    ‣ Front rail fixed (Or rear rail fixed)
    ‣ Conveyor Speed: 1 – 12m/min adjustable
    ‣ Package: 600 x 900 x 1250 mm
    ‣ Package Gross Weight: 110Kg

  • Dual Lane Transfer Conveyor

    1M Conveyor Length

    Model: YL-PTB460B

    ‣ Stainless steel lead screw width adjustment
    ‣ Ergonomically designed ESD table
    ‣ Adjustable speed control: 0 – 12m/min
    ‣ International SMEMA standard
    ‣ Modular design, PLC controller + Omron sensor
    ‣ Pass through function
    ‣ Front rail fixed
    ‣ Conveyor length: 1000mm
    ‣ Single lane mode: 50(L) x 50(W) – 500(L) x 510(W) mm
    ‣ Dual lane mode: 50(L) x 50(W) – 500(L) x 280(W) mm
    ‣ Conveyor height: 900 ± 20mm
    ‣ E-STOP press button
    ‣ CE compliance
    ‣ 2 years parts warranty
    ‣ Diameter 3mm edge belt
    ‣ Power: AC 220V, 50/60Hz, 1 phase
    ‣ PCB Convey Direction: Left to Right (Or Right to Left)
    ‣ Front rail fixed (Or rear rail fixed)
    ‣ Conveyor Speed: 1 – 12m/min adjustable
    ‣ Package: 600 x 900 x 1250 mm
    ‣ Package Gross Weight: 110Kg

  • Transfer Conveyor

    50cm Conveyor Length (Single Lane)

    Model: YL-PTB460C

    ‣ Stainless steel lead screw width adjustment
    ‣ Ergonomically designed ESD table
    ‣ Adjustable speed control: 0 – 12m/min
    ‣ International SMEMA standard
    ‣ Modular design, PLC controller + Omron sensor
    ‣ Pass through function
    ‣ Front rail fixed
    ‣ Conveyor length: 500mm
    ‣ Single lane mode: 50(L) x 50(W) – 500(L) x 460(W) mm
    ‣ Conveyor height: 900 ± 20mm
    ‣ E-STOP press button
    ‣ CE compliance
    ‣ 2 years parts warranty
    ‣ Diameter 3mm edge belt
    ‣ Power: AC 220V, 50/60Hz, 1 phase
    ‣ PCB Convey Direction: Left to Right (Or Right to Left)
    ‣ Front rail fixed (Or rear rail fixed)
    ‣ Conveyor Speed: 1 – 12m/min adjustable
    ‣ Package: 600 x 900 x 1250 mm
    ‣ Package Gross Weight: 110Kg

  • Transfer Conveyor

    1M Conveyor Length (Single Lane)

    Model: YL-PTB460D

    ‣ Stainless steel lead screw width adjustment
    ‣ Ergonomically designed ESD table
    ‣ Adjustable speed control: 1 – 12m/min adjustable
    ‣ International SMEMA standard
    ‣ Modular design, PLC controller + Omron sensor
    ‣ Pass through function + inspection function selectable
    ‣ Footswitch and PCB release key (inspection mode)
    ‣ Front rail fixed
    ‣ Conveyor length: 1000mm
    ‣ Single lane mode: 50(L) x 50(W) – 500(L) x 460(W) mm
    ‣ Conveyor height: 900 ± 20mm
    ‣ E-STOP press button
    ‣ CE compliance
    ‣ 2 years parts warranty
    ‣ Diameter 3mm edge belt
    ‣ Power: AC 220V, 50/60Hz, 1 phase
    ‣ PCB Convey Direction: Left to Right (Or Right to Left)
    ‣ Front rail fixed (Or rear rail fixed)
    ‣ Conveyor Speed: 1 – 12m/min adjustable
    ‣ Package: 1100 x 900 x 1250 mm
    ‣ Package Gross Weight: 110Kg

  • Workstation Conveyor

    1M Length (Dual Lane)

    Model: YL-PTC460A

    ‣ Stainless steel lead screw width adjustment
    ‣ Ergonomically designed ESD table
    ‣ Adjustable speed control: 0 – 12m/min
    ‣ International SMEMA standard
    ‣ Modular design, PLC controller + Omron sensor
    ‣ Pass through function + inspection function selectable
    ‣ Footswitch and PCB release key (inspection mode)
    ‣ Front rail fixed
    ‣ Conveyor length: 1000mm
    ‣ Single lane mode: 50(L) x 50(W) – 500(L) x 510(W) mm
    ‣ Dual lane mode: 50(L) x 50(W) – 500(L) x 280(W) mm
    ‣ Conveyor height: 900 ± 20mm
    ‣ E-STOP press button
    ‣ CE compliance
    ‣ 2 years parts warranty
    ‣ Diameter 3mm edge belt
    ‣ Power: AC 220V, 50/60Hz, 1 phase
    ‣ PCB Convey Direction: Left to Right (Or Right to Left)
    ‣ Front rail fixed (Or rear rail fixed)
    ‣ Conveyor Speed: 1 – 12m/min adjustable
    ‣ Package: 600 x 900 x 1250 mm
    ‣ Package Gross Weight: 110Kg

Auto Glue Machine

  • Auto glue dispensing machine

    400 x 400 x 500 mm / 330 x 330 x 360 mm

    Speed : 800mm/s
    Support : 10KG / 10KG / 5 KG
    System lamguage : Chinese
    System Storage : 100 categories above
    Electric : AG220V, 50HZ, 2000 W
    Weight : 40 – 50 KG

    -SXT-221P
    -SXT-331P
    -SXT-441P
    -SXT-551P

     

Automation

  • Auto Soldering Machine

    SXT-LS531P1
     

  • Auto Screw Machine


     

  • Auto glue dispensing machine

    400 x 400 x 500 mm / 330 x 330 x 360 mm

    Speed : 800mm/s
    Support : 10KG / 10KG / 5 KG
    System lamguage : Chinese
    System Storage : 100 categories above
    Electric : AG220V, 50HZ, 2000 W
    Weight : 40 – 50 KG

    -SXT-221P
    -SXT-331P
    -SXT-441P
    -SXT-551P

Related Product

Need services or consultant ?

Get Consultation

Need help? Call us at

019-842 5909 /

Or find us at Google Maps

© 2020 YL Industrial Supplies & Services Sdn. Bhd. (1241975-X). All Rights Reserved. || CMS Web Design by AEIOU STUDIO